l w h b surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 22 features multilayer design available in standard eia/eiaj chip sizes (0402/1005, 0603/1608, 0805/2012, 1206/3216, etc.) excellent solderability is achieved from a nickel barrier with a solder overplate provides emi attenuation without grounding broad range of impedance values available (standard line has values of 5 ? to 2,000 ? at 100 mhz) closed magnetic circuit parts are suitable for flow or re-flow soldering available in tape and reel for easy placement operational temperature range of -55? to +125? applications telecommunications equipment (cellular phones, cordless phones, faxes and isdn s) digital audio/visual equipment (tv, hdtv, vtr, dvd, catv tuners and etc.) gps and car navigation equipment high speed clocks consumer electronics signal lines lan and wan hardware part numbering system example: fcb-0603-b102p7 fcb - 0603 - b 102 p 7 series f errite c hip b eads part size eia size (length x width) impedance value 10(2) (2) = the # of zeros that will follow the first two digits example: 10(2) = 10 followed by 2 zeros = 1,000 ohms tolerance code standard value is p p = ?5% m = ?0% k = ?0% j = 5% packaging 7 = 7 inch reel 3 = 13 inch reel material characteristic determined by the desired electrical characteristic land patterns and soldering temperature profiles see page 45. packaging specifications and storage requirements see page 46. surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 20
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 23 physical characteristics size eia eiaj length (l) width (w) height (h) termination band (b) physical dimensions 0.039 0.004 (1.00 0.10) 1005 1608 2012 3216 4516 4532 0402 0603 0805 1206 1806 1812 0.020 0.004 (0.50 0.10) part number impedance ? at 100 mhz max. dcr ? max. current ma 0.031 0.006 (0.80 0.15) 0.031 0.006 (0.80 0.15) 0.014 0.006 (0.36 0.15) 0.049 0.008 (1.25 0.20) 0.063 0.008 (1.60 0.20) 0.063 0.008 (1.60 0.20) 0.126 0.010 (3.20 0.25) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) 0.055 0.010 (1.40 0.25) 0.020 0.010 (0.51 0.25) 0.043 0.008 (1.10 0.20) 0.020 0.010 (0.51 0.25) 0.035 0.008 (0.90 0.20) 0.020 0.010 (0.51 0.25) 0.020 0.004 (0.50 0.10) 0.010 .004 (0.25 0.10) 0.063 0.006 (1.60 0.15) 0.079 0.008 (2.00 0.20) 0.126 0.008 (3.20 0.20) 0.177 0.010 (4.50 0.25) 0.177 0.010 (4.50 0.25) fcb-0402-b100p* fcb-0402-b150p* fcb-0402-b700p* fcb-0402-b121p* fcb-0402-b221p* fcb-0402-b601p* fcb-0402-b102p* notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. 10 15 70 120 220 600 1,000 0.05 0.07 0.40 0.50 0.70 1.10 1.50 500 300 100 50 50 200 electrical characteristics standard fcb-0402 sizes part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-0603-b300p* fcb-0603-b400p* fcb-0603-b600p* fcb-0603-b750p* fcb-0603-b800p* fcb-0603-b900p* fcb-0603-b101p* fcb-0603-b121p* fcb-0603-b141p* fcb-0603-b151p* fcb-0603-b181p* fcb-0603-b221p* fcb-0603-b301p* fcb-0603-b421p* fcb-0603-b601p* fcb-0603-b102p* notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. dimensions in inches (mm) 30 40 60 75 80 90 100 120 140 150 180 220 300 420 600 1,000 0.10 400 210 0.20 0.35 0.40 0.45 0.60 230 190 0.30 250 300 standard fcb-0603 sizes part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-0603-h180p* fcb-0603-h121p* fcb-0603-h141p* fcb-0603-h421p* fcb-0603-h601p* fcb-0603-h721p* fcb-0603-h102p* 18 120 140 420 600 720 1,000 0.10 0.40 0.30 0.50 0.65 0.70 0.60 400 150 50 200 fcb-0603 high speed beads surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 21
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 24 electrical characteristics continued part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-1206-a190p* fcb-1206-a260p* fcb-1206-a300p* fcb-1206-a310p* fcb-1206-a500p* fcb-1206-a600p* fcb-1206-a700p* fcb-1206-a800p* fcb-1206-a900p* fcb-1206-a101p* fcb-1206-a121p* fcb-1206-a201p* fcb-1206-a301p* fcb-1206-a601p* fcb-1206-b102p* fcb-1206-b152p* fcb-1206-b202p* notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. consult factory for other impedance values of the 1206 footprint that are available from spectrum control. 19 26 30 31 50 60 70 80 90 100 120 200 300 600 1,000 0.10 600 0.30 0.40 0.50 0.70 0.90 0.60 200 150 300 100 1,500 @ 50 mhz 2,000 @ 30 mhz 0.20 400 standard fcb-1206 sizes part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-1806-a800p* fcb-1806-a101p* fcb-1812-b121p* notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. consult factory for other impedance values of the 1806 and 1812 footprint that are available from spectrum control. 80 100 120 0.30 0.30 0.30 300 200 300 standard fcb-1806 and fcb-1812 sizes part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-0805-h180p* fcb-0805-h201p* fcb-0805-h601p* fcb-0805-h751p* fcb-0805-h102p* 18 200 600 750 1,000 0.10 0.40 0.40 0.70 0.75 600 200 100 fcb-0805 high speed beads part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-1206-h300p* fcb-1206-h181p* fcb-1206-h601p* 30 180 600 0.10 0.30 0.30 600 300 200 fcb-1206 high speed beads part number impedance ? at 100 mhz max. dcr ? max. current ma fcb-0805-a050p* fcb-0805-a070p* fcb-0805-a100p* fcb-0805-a110p* fcb-0805-a300p* fcb-0805-a400p* fcb-0805-a500p* fcb-0805-a600p* fcb-0805-a750p* fcb-0805-a800p* fcb-0805-b900p* fcb-0805-b101p* fcb-0805-b121p* fcb-0805-b151p* fcb-0805-b181p* fcb-0805-b201p* fcb-0805-b301p* fcb-0805-b401p* fcb-0805-b421p* fcb-0805-b601p* fcb-0805-b751p* fcb-0805-b102p* fcb-0805-b152p* fcb-0805-b202p* fcb-0805-e202p* notes: * please add packaging code at the end of part. to change tolerance code, replace p with other tolerance values. consult factory for other impedance values of the 0805 footprint that are available from spectrum control. 5 7 10 11 30 40 50 60 75 80 90 100 120 150 180 200 300 400 420 600 750 1,000 1,500 2,000 2,000 standard fcb-0805 sizes 0.07 0.10 0.15 400 200 0.30 0.40 0.55 0.70 0.30 200 200 200 100 800 800 surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 22
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 25 typical impedance characteristics (curves not listed are available upon request or at our website.) 0402 size fcb-0402-b150 |z|, xl, r (ohm) frequency (mhz) 100.00 10.00 1.00 0.10 1 10 100 1000 0.01 |z| r xl fcb-0402-b221 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl 0603 size fcb-0603-b300 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 xl r |z| fcb-0603-b600 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b800 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b900 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 23
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 26 typical impedance characteristics (curves not listed are available upon request or at our website.) 0603 size continued fcb-0603-b101 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b121 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b601 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b102 |z|, xl, r (ohm) frequency (mhz) 10000 100 10 1 1 10 100 1000 0.1 1000 |z| xl r fcb-0603-b151 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0603-b301 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 24
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 27 typical impedance characteristics (curves not listed are available upon request or at our website.) 0805 size fcb-0805-a300 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0805-a500 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0805-a600 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r xl |z| fcb-0805-b101 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0805-b121 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0805-b301 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r xl |z| fcb-0805-b601 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-0805-b102 |z|, xl, r (ohm) frequency (mhz) 10000 1000 100 10 1 10 100 1000 1 r xl |z| surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 25
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 28 typical impedance characteristics (curves not listed are available upon request or at our website.) 1206 size fcb-1206-a300 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a500 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a800 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a900 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a600 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a700 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 26
surface mount emi filters ferrite chip beads spectrum control inc. 8031 avonia rd. fairview, pa 16415 phone: 814-474-2207 fax: 814-474-2208 web site: www.spectrumcontrol.com spectrum control gmbh hansastrasse 6 91126 schwabach, germany phone: (49)-9122-795-0 fax: (49)-9122-795-58 29 typical impedance characteristics (curves not listed are available upon request or at our website.) 1206 size continued fcb-1206-a101 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a121 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a601 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-b102 |z|, xl, r (ohm) frequency (mhz) 10000 100 10 1 1 10 100 1000 0.1 1000 |z| xl r fcb-1206-a201 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl fcb-1206-a301 |z|, xl, r (ohm) frequency (mhz) 1000 100 10 1 1 10 100 1000 0.1 r |z| xl surface mount filters & inductors *1130 printer 003-62 v2 2/18/03 1:46 pm page 27
|
